Goat Grain Feeder Frugal Storage Bin DIY Project – Goats

This simple Goat Grain Feeder Frugal Storage Bin DIY Project – Goats takes less than a half of an hour to make and install for each goat feeder bucket.

Goat Grain Feeder Frugal Storage Bin DIY Project - Homesteading Goats

Materials and Tools:

Wire

Sharpie Pen

Cinder blocks

Plastic Storage Bin

Utility knife

Tape measure

~

Directions:

~

Step 1. Measure and mark the feeder opening which should
be 3 inches from the bottom of the plastic storage bin, the holes should be in the front section of the plastic storage bin.

Step 2. Cut out the marked area using the utility knife.

Step 3. Attach the plastic storage bin to the goat fence or barn using wire
at a height that your with your goats reach.

Step 4. Place a cinder block directly below each feeder,
the goats will use this as a step to reach the feeder.

Step 5. Add the grains or hay to the goat feeder.

Click here to read about how to build a Goats Plastic Bucket Frugal Grain Feeder DIY Project:

https://www.backyardherds.com/threads/homemade-hay-feeder.23019/  

You may also like...