How to Make Garage Door Energy Efficient to Stop Losing Heat is a great way to shave off dollars that you are paying monthly on your utility bill.

It can be fixed and be made energy efficient to keep heat inside their house because it can seep out through there. It is to prepare andeasyto install. Buybright barrier piecesmeasured at the standard size of allpanels per row of a garage door. Get some rubbing alcohol and pour it into a bottle with a spray attached to help wipe clean the exteriorto create a better surface for the adhesion spray or even tape that is made to be dual-sided. A regular pair of scissors, if not a pair of box cutters,can work well also for cutting the slots to make hinges for the doors plus cutting off any extra material to the end.

Look at the garage door panels to see if any collapsing fiberglass on the garage door have fallen upon the garage floor.

Next, spray and scrub up the panels.

Open the bright barrier to straighten it out.

Spray on the sides of the garage door and its insulation with some strong adhesive.

Get someone else to help out with this step to make it easier to hold it down and spray on.

Spray, open, press the complete section, and place it on the door.

Make slots for the new hinges while thebarricade is put on.

Snip off any extra on the ends so it doesn’t stick out passed the door.

Once they are attached, simply press them along entire panels to make sureit is properly bonded.

Open up the garage door to check for its appropriate alignment and panel separation.

Ta-da! The garage is energy efficient regardless of season. Saves heat in the Winter and repells heat in the Summer.

Click here to read about how to Make Garage Door Energy Efficient to Stop Losing Heat:

http://www.instructables.com/id/Make-your-garage-energy-efficient-Easy-install-of-/